The linear guide is widely used in life. How much we know about this product, maybe you feel very blank and have a lot of questions. The following Hao Ruixiang Mechanical and Electrical summarizes several difficult questions about the linear guide rail to answer it!
How is the lubricating fat on the line rail?
It should be known that the life of the straight -line guide rail has a great impact. The principle of lubrication referred to here is: it refers to basic oils and additive categories. If they are different types of lubrication, their performance is very different. The allowable rotation range is also different. When choosing, you must pay attention. The performance of lubricating fat is determined by the basic type. General viscosity, it only makes it suitable for low temperature and high -speed use. If it is high viscosity, it is suitable for high temperature and high load. Thickening also has a serious impact on lubrication performance. It determines its water resistance. The lubrication of different brands cannot be mixed, otherwise it will have a adverse effect on it.
Should I clean it before the rail installation?
There will be anti -rust oil on the surface. We should clean it with clean gasoline, kerosene and other, and add high -quality lubricant, which can be installed. The cleanliness has a great impact on the life of the linear guide, as well as vibration and noise, but reminds friends that the full -seated straight guide track should not be cleaned and refueling.
How to install and disassemble the straight line guide?
Do not directly strike the end surface when installing the straight -line guide rail, as well as non -power, to ensure that the force is uniform during installation. If you apply lubricating oil during installation, it will be more stable. When disassembling is difficult, the disassembly tool can be used to pull out, and the heat oil can be poured above the inner ring.
